# Film Capacitor Failure Analysis


Film capacitors (polymer film) are generically called “film caps” as well as power film capacitors which are electrical capacitors with an insulating plastic film as the dielectric, sometimes combined with paper as carrier of the electrodes. The dielectric films, depending on the desired dielectric strength, are drawn in a special process to an extremely thin thickness, and are then provided with electrodes. The electrodes of film capacitors may be metallized aluminum or zinc applied directly to the surface of the plastic film, or a separate metallic foil overlying the film. Two of these conductive layers are wound into a cylinder shaped winding, usually flattened to reduce mounting space requirements on a printed circuit board, or layered as multiple single layers stacked together, to form a capacitor body.


## Pages

- [Acrylic Film Capacitor Failures](https://gideonlabs.com/posts/acrylic-film-capacitor-failures/index.md)
- [IC EMI MKP .33uF Film Capacitors Failures](https://gideonlabs.com/posts/ic-emi-mkp-33uf-film-capacitors-failures/index.md)
- [Failure Analysis on Metallized Film Capacitor](https://gideonlabs.com/posts/failure-analysis-on-metallized-film-capacitor/index.md)
- [Vishay MKT 1917 Film Capacitor Failure Analysis](https://gideonlabs.com/posts/film-capacitor-failure-analysis/index.md)
- [Wima versus Vishay Film Capacitor Comparison](https://gideonlabs.com/posts/film-capacitor-comparison/index.md)